Neo Industrialv0.56.119 Español

Home › Heat, kinetics and steam

Fluid Heat Generator

ID: neoindustrial:fluid_heat_generator

Burns liquid fuel and gives heat through its front: biogas 32 hU/t and coalfuel 80 hU/t, using 10 mB/s. Also burns other mods' fuels (oil, ethanol, fuel...). Only burns while something takes the heat.

Heat generators

They produce heat (hU) instead of EU and deliver it through their front (the copper plate) to the machine attached there. That machine must take heat on the side it touches:

Machine that uses heatSide it takes heat on
Blast Furnaceback
Stirling Generatorback
Fermenterback
Steam Boilerany

They all burn only while something uses the heat: if the machine in front is full or off, they use nothing. The wrench turns them.

Which one to use

GeneratorWhat it usesHeat
Electric Heat Generator1 EU per hU10 hU/t per Coil in its 10 slots (up to 100 hU/t)
Solid Heat Generatorfurnace fuel (coal, wood...)20 hU/t; sometimes leaves Ashes. The fire shows at the back
Fluid Heat Generatorliquid fuelbiogas: 32 hU/t at 10 mB/s; coalfuel: 80 hU/t at 10 mB/s; other mods' fuels too
Radioisotope Heat Generatornothing (RTG pellets, never used up)2, 4, 8, 16, 32 or 64 hU/t depending on how many Pellets of RTG Fuels (each one doubles, one per slot)
Liquid Heat Exchangerheat from a fluid20 hU per mB: hot coolant → coolant, lava → pahoehoe lava

Liquid heat exchanger

  • Each Heat Conductor inside lets 10 hU/t through (2 to 10 conductors).
  • It only cools when the machine in front accepts the heat and there is room for the cold fluid.
  • 2,000 mB tanks; takes ejector and pulling upgrades (fluid ones too). Ideal for using the fluid reactor's heat.

More in the Heat, kinetics and steam guide.

Data

Tank10,000 mB
Block hardness3
Blast resistance6
Needs the right toolyes

How to make it